Welcome to Wiimmfi and the WHB forums.

Assuming you have ran the PIDtool and got your session ID, all you have to do now is to wait until your friend codes are submitted to the Wiimmfi database. Please allow up to 24 hours as this process is ran every such time span.
To check whether your FCs are sent to the database, please take a look at your session / link or simply try to connect to Wiimmfi.

Assigning your console can only be done if either you can use any of your old friend codes again, or create a new account, connect to Wiimmfi and use the new code to assign your console (and/or your other friend codes.)

When in doubt, try running the tool again and get a hold of the results sent to you. If you haven't received any positive feedback please further reply to this thread.

Have a good time around.

If that doesn't work you could also generate one new profile, then link your console to your WHB account ( wiimmfi.de/assign-console ), then use that to enable your old friend code.

The script runs every 6 hours. And looking here: wiimmfi.de/stat?m=18
you'll find: Last update of retrieved data: 2h 57m, 2017-01-11 20:05

Right, I did not know that. I've been told by different members that it runs every 24 hrs. Thanks for the update.

And all time I read it, I tell about the 6h cycle. At the beginning it was every 8h, but since mid 2014 it runs every 6 hours.

If you can play in Region 133, you are using Wiimms MKW Fun, which is a custom track distribution. That is not used by many players in regional races so you don't find players often. You'd need to use a normal Wiimmfi image.

Yes. When you are using Wimms MKW Fun, you can only find other players with MKW Fun.

If you have linked your console to your account, you can visit this page: wiimmfi.de/status

You should see two profiles there, the new one with a friend code and the old one with "invalid" as friend code. You can click the button "SET FC" and follow the instructions to make that old profile work.

Hey, i'm sorry for using this post to seek help, but it's quick:

I have tried pidtool and waited for more than 24 hours, but I still get the 60000 error, so my question is: do I have to delete my old brawl's save file? (I don't remember my friend code)

Thanks... let me know if I should create a new thread for this

Try using the PIDtool again @brian_wilson, if that doesn't work try what Leseratte had suggested

That doesn't really work for SSBB if he doesn't know his friend code ...

Right, whoops lmao
Unfortunately you would need to rid of your save then. Do make a backup of it though, you don't want to trash your old precious saves like I used to do!

Alright, I'll try and update you guys as soon as possible of what's going on.

Thanks so much for the quick response!!!!

when you use pidtool, it should give you a link in which it shows you the status of your friend codes. Have you checked this?

You mean "https://maschell.de/pidtool.php?check=xxxxxxxxxx", right? I have, all the sessionids it gave me for each time I've executed pidtool, but it always says "sessionid not found".

Yesterday I deleted my save file, created a new one and used pidtool again. I'm waiting for another 24hrs...

@!&$@!#@ deleting the save file worked! I'm connected! Thanks sooooo much!!