Spiel startet nicht unter Devolution

      Spiel startet nicht unter Devolution

      Ich versuche die ganze Zeit Devolution zum laufen zu bringen.

      1. Ich nutze meine normale softgemoddete Wii
      2. Ich dumpe mein Gamecube Spiel mit Cleanrip 2 und lasse den Dump verifizieren und lasse die Disk gleich drin (PSO I+II)
      3. packe die iso in den Ordner games (in usbloader gx in /games/Spielname [ID])
      4. starte den Devolution Loader, mounte meine nonSDHC Karte und starte das Spiel per Wii Classic Pro Controller (spiel wird erkannt)
      5. die Wiimote bleibt an, mein TV stellt sich auf das Format 576i SD und der Bildschirm bleibt schwarz. Kein blinken des Laufwerklichtes


      Wenn ich es über den USBLoader GX versuche, das gleiche Problem.
      Lasse ich die Disc raus, blinkt die LED 2 mal immer wieder.

      Ich habe verschiedene SD Karten und USB Sticks probiert.

      Hat jemand einen Tipp?


      Ich habe es mit anderen Speichermedien und mit anderen Spielen versucht, aber nicht.

      hab das wifi logging benutzt. Hier ist das Ergebnis:
      Spoiler anzeigen

      Wifi is ready
      Devolution Engine r200 2013/07/05 18:29:22 Copyright (C) tueidj
      AI clock configured (17656392)
      Exception vectors placed.
      MMU initialized.
      IOS was reloaded (003a1820)
      stm_eh_fd: 0
      stm_imm_fd: 1
      GPIO Flags: 00ffc3a0
      IOS communication initialized.
      Wiimote Rumble is ON
      Starting to bring up network
      HID FD: 2
      OH1 FD: 3
      hci_complete: stage 0, ogf 00, ocf 00, result 0
      hci_complete: stage 0, ogf 03, ocf 03, result 0
      hci_complete: stage 0, ogf 04, ocf 05, result 0
      hci_complete: stage 0, ogf 03, ocf 24, result 0
      hci_complete: stage 0, ogf 03, ocf 13, result 0
      hci_complete: stage 0, ogf 03, ocf 1a, result 0
      hci_complete: stage 0, ogf 03, ocf 0a, result 0
      hci_complete: stage 0, ogf 03, ocf 33, result 0
      hci_complete: stage 0, ogf 04, ocf 01, result 0
      HCI Revision: 40a7
      hci_complete: stage 0, ogf 04, ocf 09, result 0
      Found stored link key for 26:94:57:f7:6b:d8
      hci_complete: stage 0, ogf 03, ocf 0d, result 0
      hci_complete: stage 0, ogf 03, ocf 45, result 0
      hci_complete: stage 0, ogf 03, ocf 47, result 0
      hci_complete: stage 0, ogf 03, ocf 43, result 0
      hci_complete: stage 0, ogf 3f, ocf 4f, result 0
      hci_complete: stage 0, ogf 3f, ocf 4c, result 0
      hci_complete: stage 1, ogf 3f, ocf 4c, result 0
      hci_complete: stage 1, ogf 3f, ocf 4f, result 0
      hci_complete: stage 1, ogf 03, ocf 03, result 0
      hci_complete: stage 1, ogf 04, ocf 05, result 0
      hci_complete: stage 1, ogf 03, ocf 24, result 0
      hci_complete: stage 1, ogf 03, ocf 13, result 0
      hci_complete: stage 1, ogf 03, ocf 1a, result 0
      hci_complete: stage 1, ogf 03, ocf 0a, result 0
      hci_complete: stage 1, ogf 03, ocf 33, result 0
      hci_complete: stage 1, ogf 03, ocf 45, result 0
      hci_complete: stage 1, ogf 03, ocf 47, result 0
      hci_complete: stage 1, ogf 03, ocf 43, result 0
      hci_complete: stage 2, ogf 03, ocf 24, result 0
      hci_complete: stage 2, ogf 03, ocf 18, result 0
      hci_complete: stage 2, ogf 03, ocf 13, result 0
      HCI Init finished.
      GETLINKSTATUS returned 1 (in progress)
      GETLINKSTATUS returned 4 (wireless down)
      IOCTL_NWC24_STARTUP returned 0 (0)
      IOCTL_SO_STARTUP returned 0
      Got negative IPC reply for 93227CC0 (-1062731406)
      Host IP Address: 192.168.1.114
      net init result: 1 (4)
      Network initialization succeeded
      Socket number for log: 0
      Result from FCNTL: 0
      bind returned 0
      sendto returned 14
      USB FD: 5
      Found 1 USB devices while searching for Mass Storage
      Device 0: id e71f0021 VID 0781 PID 556B
      Device class 00, subclass 00, protocol 00
      Number of configurations: 1
      Configuration 1 has 1 interfaces
      Interface 0 has 2 endpoints
      Endpoint 81 Attributes 02 MaxPacket 0200
      Endpoint 02 Attributes 02 MaxPacket 0200
      Current device configuration: 1
      Using config 1, interface 0, alt 0, ep_in 81, ep_out 02
      USB Manufacturer: SanDisk
      USB Product ID: Cruzer Edge
      USB Device Serial Number: 20060266831B71D08B9A
      USB device reset returned 8
      Device MAX_LUN returned 9: 1
      Cleared USB storage error status for LUN 0
      Supported inquiry length: 72
      Vendor ID "SanDisk" Product ID "Cruzer Edge" Revision "1.26" Type 00
      LUN 0 is a Direct Access device
      USB_MS sector size for LUN 0: 512, max LBA: 62530623
      Using storage device: "USB SanDisk Cruzer Edge Rev 1.26", serial 71D08B9A
      MBR partition offset: 00000800
      MBR partition offset: 00000000
      MBR partition offset: 00000000
      MBR partition offset: 00000000
      Found a FAT partition at sector 2048 (1)
      Number of bytes per FAT entry: 4 (FAT32)
      Sectors per cluster: 32 (16K)
      FAT1 first sector: 4300
      FAT2 first sector: 19558
      Root cluster / sector: 2 / 34816
      First Data sector: 34816
      End sector boundary: 62527488
      Total number of clusters: 1952896
      Specified cluster for memcard file: 00015C54
      Cluster for MEMCARD file: 89172 (2888256)
      Checking file fat chain...
      Total allocated size of file: 16777216 bytes in 32768 sectors
      MEMCARD has 1 fragments
      memcard serial: 00000000 00000000 00000000
      Memory card emulation activated (80)
      Specified cluster for iso file: 00000039
      ISO file found: GPOP Disc 1 Version 0
      Disc Name: PHANTASY STAR ONLINE EPISODE I&II
      Checking file fat chain...
      Total allocated size of file: 1459978240 bytes in 2851520 sectors
      Result: 1 fragments
      Searching for a free cluster...
      Found free cluster 1952895 in FAT sector 19532 (12796)
      HID device change callback was registered
      HID device change: 0 devices present
      HID device change callback was registered
      BT connection request (04 25 00)
      SI slot 0 was assigned
      BT0 was opened
      BT0 device name: Nintendo RVL-CNT-01
      Connection Complete (000b)
      HCI cmd complete: 01 0b 00
      Finding wiimote extension...
      Extension ID: 0100A4200101
      Classic Controller Pro found on BT0
      Calibration was started
      Calibration finished
      CAL CENTRE 0: 0021
      CAL CENTRE 1: 0020
      CAL CENTRE 2: 000f
      CAL CENTRE 3: 000f
      New WiFi channel: 2 (AFH_LO 1 AFH_HI 30)
      HCI cmd complete: 03 3f 00

      Hoffe das hilft jemanden
      "Videogames are meant to be just one thing - Fun. Fun for everyone" - Satoru Iwata (1959 - 2015)