Slot-1/2 karte(von Nintendo oder andere egal) in das ds stecken ds starten pictochat starten, irgend einen Raum betreten 2 Sekunden warten slot-1/2 Karte herausnehmen die farbe gibt die Version an.
z.b.
•v1 Freezes
•v2 graues Blau
•v3 Dunkles Grün
•iQue Dunkles Grün (512KB stat 256KB Firmware speicherplatz)
•flushme Dunkles Grün (based on v3)
•v4 Gelb
•v5 Magenta (selten ds/ oft ds lite)
•v6 dunkel Blau (nur ds lite)(gibt es die wirklich?)
•v7 nichts (goldenes ds lite limmitiert)
v1 erste version
v2+ deinit wifi added close bug added
v3+ close bug fix
v4+ block WifiMe und altes PassMe.
v5+ ds lite licht einstellung/DS Download Play protocol update
v6+ hardware anpassung
v7 block das
flushme:
Spoiler anzeigen
Hilft vieleicht mal.
ADD: Firmware dumper.zip <-- Achtung nicht getestet
ADD2: ein dumper der auch die swi dumpt dsbf_dump_dldi.zip <-- Achtung nicht getestet
z.b.
•v1 Freezes
•v2 graues Blau
•v3 Dunkles Grün
•iQue Dunkles Grün (512KB stat 256KB Firmware speicherplatz)
•flushme Dunkles Grün (based on v3)
•v4 Gelb
•v5 Magenta (selten ds/ oft ds lite)
•v6 dunkel Blau (nur ds lite)(gibt es die wirklich?)
•v7 nichts (goldenes ds lite limmitiert)
v1 erste version
v2+ deinit wifi added close bug added
v3+ close bug fix
v4+ block WifiMe und altes PassMe.
v5+ ds lite licht einstellung/DS Download Play protocol update
v6+ hardware anpassung
v7 block das
flushme:
The button combination A+B+X+Y, gamecode "PASS" or title "DSBooter" on the GBA cartridge automatically starts program from GBA cartridge (starting from offset 0xC0), as with PassMe.
Fallback to standard firmware: The Select button skips gamecode detection. This means you can hold Select to boot the DS card, Select+B to boot the GBA card, or Select+Start to enter the firmware menu. Useful if you have a card with GBA/DS dual compatible firmware, such as a GBA Movie Player v2 with Chishm's firmware.
Failsafe feature: The button combination A+B+Select+Start starts program from GBA cartridge even if most of the firmware is erased, but it doesn't initialize as much of the hardware. [1]
Backlight fades in at startup.
Effectively removes the health screen, making it less annoying to boot. If you want to maintain the health screen, such as for warranty purposes, the official FlashMe page has a so-called "stealth" version that does not remove the health screen.
Remove RSA signature check for Wireless MultiBooting (WMB) homebrew NDS files.
Fallback to standard firmware: The Select button skips gamecode detection. This means you can hold Select to boot the DS card, Select+B to boot the GBA card, or Select+Start to enter the firmware menu. Useful if you have a card with GBA/DS dual compatible firmware, such as a GBA Movie Player v2 with Chishm's firmware.
Failsafe feature: The button combination A+B+Select+Start starts program from GBA cartridge even if most of the firmware is erased, but it doesn't initialize as much of the hardware. [1]
Backlight fades in at startup.
Effectively removes the health screen, making it less annoying to boot. If you want to maintain the health screen, such as for warranty purposes, the official FlashMe page has a so-called "stealth" version that does not remove the health screen.
Remove RSA signature check for Wireless MultiBooting (WMB) homebrew NDS files.
Hilft vieleicht mal.
ADD: Firmware dumper.zip <-- Achtung nicht getestet
ADD2: ein dumper der auch die swi dumpt dsbf_dump_dldi.zip <-- Achtung nicht getestet
Dieser Beitrag wurde bereits 15 mal editiert, zuletzt von ichfly ()