[MKWii] Create Traffic Dumps and use mkw-ana

      [MKWii] Create Traffic Dumps and use mkw-ana

      Hello,
      this tutorial will show you how to create dumps of your Wii's network traffic and how to use these dumps with mkw-ana.
      This can be useful for error analysis, finding/proving cheaters and more.

      I. Prerequisites
      For this tutorial you need the following Hard- and Software:
      • Nintendo Wii / Nintendo Wii U
      • A Computer/Laptop with LAN and Wifi capabilities
      • LAN cable to connect your Computer/Laptop to
      • Wireshark
      • mkw-ana
      • Windows 7 or newer(to dump with this method)
      • Administrator privileges


      II. Install tools
      First, download Wireshark and mkw-ana from the links above.
      Then, we'll install Wireshark. Always click next without changing everything.
      While the Wireshark Setup is running, the following Window will pop up:

      This will install the WinPcap driver on your Computer, also just click Next without changing anything.

      After successful installation, we'll setup mkw-ana:
      mkw-ana setup
      First, you extract the downloaded Zip-Archive to any directory. Go to the just extracted folder and copy the folder "cygwin" inside it to the root of your Windows Drive(C:\) and rename the folder to mkw-ana. It should look like this at the end:



      First, right-click My Computer and click Properties. Click Advanced System Settings in the left collumn. In the System Properties Window click the Environment Variables button.
      Find the entry PATH in the System Variables list:

      Select it, click on edit and add the following at the end of the text:

      Quellcode

      1. ;C:\mkw-ana



      Congratulations, the basic setup is finished. You can test it by opening a new Command Promt and type in mkw-ana.


      Once this is done, you're ready for the next step.

      III. Creating a "Hosted Network"
      Now I'll guide you to the creation of the so called "Hosted Network", which is nothing more than a Wifi Hotspot hosted by your Computer.
      First, start a Command Promt with Administrator privileges:


      Now enter the following Command into the Command Promt and replace the values "MyNetworkName" and "MyNetworkPassword" so it fits your needs.

      Quellcode

      1. netsh wlan set hostednetwork mode=allow ssid=MyNetworkName key=MyNetworkPassword


      After that, you need to enter this Command to start the Hosted Network:

      Quellcode

      1. netsh wlan start hostednetwork

      This starts the Virtual Network Device so we can edit it to share the Internet Connection of your LAN. Sharing your Wifi Network is NOT possible with just one Wifi-Card, since one Card is already used for the Hosted Network.
      To share your Internet Connection, right-click the Networking Icon in the right corner and click on Network- and Sharing center
      Here you first search for the just created Hosted Network(which has the given SSID in the Name) click on the Network device you want to share the Internet Connection from and click on Preferences.
      At the top of the new Window, click on Sharing, tick the Checkbox and select the Hosted Network Device which you just identified in the Main Window.
      Click on OK to save the changes. Now you've completely set up your Hosted Network. Enter the given credentials into your Wii System Menu and connect to the Hosted Network. It should work without any problems.

      Before you proceed, please reboot your Computer so it can save all changes. After the Restart, you need to start the Hosted Network again with the following Command in a Command Promt with Administrator privileges:

      Quellcode

      1. netsh wlan start hostednetwork



      IV. Using Wireshark and mkw-ana
      Now, after you've set up everything, you can start Wireshark and start the Traffic Dump.
      Starting Wireshark and configure the Dump Settings
      Start Wireshark, you can find it in your Start Menu.
      In the Interface List on the left side, select the Network Interface of your Hosted Network, on my Computer it's "LAN-Verbindung* 1":

      Now Click on Capture Options to set the Path where the Dump file is saved.
      In the New Window, click on the button browse, go to your User folder(the folder named with your Username in the left collumn) and enter the Name "mkw-ana.pcap". It should look like this:


      Now you can click on Start. Wireshark will now capture the whole traffic of your Wii.

      Using mkw-ana
      Now you can use mkw-ana to show, for example, a race table which shows if there are any hackers in your room.
      To do this, start a new Command Promt. First we need to edit the default size of it so the race table fits into the Promt. Right-click the Title of the Command Promt and click on Defaults. In the Tab Menu at the top of the Window click on Layout and enter the following values:


      Click on OK,close this Command Promt and open a new one so the changes can take effect.
      To start mkw-ana's race table, enter the following command:

      Quellcode

      1. mkw-ana --follow RACE mkw-ana.pcap


      Now once you're playing Mario Kart Wii online, the race table will build up. More information about mkw-ana, the race table and other helpful commands inside of mkw-ana can be found on the homepage.



      I hope this Tutorial helped you in setting up Wireshark and mkw-ana.
      If you have any questions or suggestions, please write them down here.


      This Tutorial is written for Wii-Homebrew.com and is Copyright of me, Ciapa. You are not allowed to copy this tutorial or the photos of it neither complete nor parts of it.
      14.932 bytes pure destruction.

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Xidus ()

      Danny08 schrieb:

      Because not everybody got 2 wifi cards i think arp spoofing is a better method.

      With arp spoofing you lost packets in the time between a regular arp packet and the spoof arp packet.

      WIT: Wiimms ISO Tools
      Verwaltet Plain ISO, WDF, WIA, CISO, WBFS, FST: kann Extrahieren, Erstellen, Patchen, Mischen und Überprüfen

      SZS: Wiimms SZS Tools
      Verwaltet SZS-, BRRES-, U8-, BMG-, BREFT-Dateien uvm.


      PN ohne persönlichen Charakter werden ignoriert. Support-Anfragen gehören ins Forum.